IPS511 Infineon Technologies IC MOSFET HS PWR SW 5A TO-220-5
Интегральные схемы (ИС) TO-220-5
Номер производителя:
IPS511
Производитель:
Категория продукции:
Описание:
IC MOSFET HS PWR SW 5A TO-220-5
Состояние RoHs:
Таблицы данных:
IPS511 Таблицы данных(PDF)
Current - Output (Max) :
1.7A
Fault Protection :
Current Limiting (Fixed), Open Load Detect, Over Temperature
Features :
Auto Restart
Input Type :
Non-Inverting
Interface :
On/Off
Number of Outputs :
1
Operating Temperature :
-40°C ~ 150°C (TJ)
Output Configuration :
High Side
Output Type :
N-Channel
Package / Case :
TO-220-5
Packaging :
Tube
Part Status :
Obsolete
Ratio - Input:Output :
1:1
Rds On (Typ) :
110 mOhm
Series :
-
Supplier Device Package :
TO-220AB (5-LEAD)
Switch Type :
General Purpose
Voltage - Load :
5.5 V ~ 35 V
Voltage - Supply (Vcc/Vdd) :
Not Required
в наличии
18,538
Unit Price:
Свяжитесь с нами
Предложение
IPS511 Конкурентные цены
ChipMlcc имеет уникальный источник поставок. Мы можем предложить IPS511 более
конкурентоспособную цену для наших клиентов. Вы можете насладиться нашим лучшим
сервисом, купив Chipmlcc IPS511. Пожалуйста, не стесняйтесь обращаться по поводу
лучшей цены на IPS511. Нажмите, чтобы получить предложение
IPS511 Особенности
IPS511 is produced by Infineon Technologies, belongs to PMIC - Переключатели распределения питания, драйверы нагрузки, the interface mode is On/Off, and its best working temperature is -40°C ~ 150°C (TJ), the size is TO-220-5, and Tube is its most common packaging method, which belongs to the - series, using TO-220AB (5-LEAD).
IPS511 Подробная информация о продукции
:
IPS511 — это PMIC - Переключатели распределения питания, драйверы нагрузки, буферные усилители, разработанные и
произведенные
Infineon Technologies.
IPS511 производства Infineon Technologies можно приобрести на сайте CHIPMLCC.
Здесь вы можете найти различные виды электронных деталей от ведущих производителей мира.
IPS511 компании CHIPMLCC прошел строгий контроль качества и соответствует всем требованиям.
Статус запасов, отмеченный на CHIPMLCC, предназначен только для справки.
Если вы не нашли запчасть, которую ищете, вы можете связаться с нами для получения дополнительной информации, такой как количество запасов в таблице данных IPS511 (PDF), цена IPS511, Распиновка IPS511, руководство IPS511 и решение на замену IPS511.
IPS511 производства Infineon Technologies можно приобрести на сайте CHIPMLCC.
Здесь вы можете найти различные виды электронных деталей от ведущих производителей мира.
IPS511 компании CHIPMLCC прошел строгий контроль качества и соответствует всем требованиям.
Статус запасов, отмеченный на CHIPMLCC, предназначен только для справки.
Если вы не нашли запчасть, которую ищете, вы можете связаться с нами для получения дополнительной информации, такой как количество запасов в таблице данных IPS511 (PDF), цена IPS511, Распиновка IPS511, руководство IPS511 и решение на замену IPS511.
IPS511 FAQ
:
1. What is IPS511 and what are its main applications?
IPS511 is a discrete semiconductor device commonly used in power management applications, such as voltage regulation and current control in electronic circuits.
2. What are the key electrical specifications of IPS511?
The key electrical specifications of IPS511 include its maximum voltage rating, current handling capability, on-state voltage drop, and thermal resistance.
3. How does IPS511 compare to other similar semiconductor devices in terms of performance and efficiency?
IPS511 offers competitive performance and efficiency compared to other similar devices, with its unique combination of voltage/current ratings and low on-state resistance.
4. What are the typical operating conditions for IPS511?
IPS511 is typically operated within a specified range of voltage, current, and temperature, ensuring optimal performance and reliability in various applications.
5. What are the recommended mounting and thermal management practices for IPS511?
Proper mounting techniques, such as using appropriate heatsinks and thermal interface materials, are crucial for maintaining the temperature of IPS511 within safe limits during operation.
6. Can IPS511 be used in parallel or series configurations for higher power applications?
Yes, IPS511 can be configured in parallel or series to increase current handling capability or voltage rating, respectively, in high-power applications.
7. What are the common failure modes of IPS511 and how can they be mitigated?
Common failure modes of IPS511 include overcurrent, overvoltage, and thermal overstress. These can be mitigated by implementing proper protection circuits and thermal management strategies.
8. Are there any specific layout considerations when designing a circuit using IPS511?
Careful attention should be given to the layout of the circuit to minimize parasitic effects, optimize current paths, and ensure proper heat dissipation for IPS511.
9. What are the industry standards and certifications relevant to IPS511?
IPS511 may comply with industry standards such as JEDEC, RoHS, and specific application-related certifications, depending on the intended use and market requirements.
10. Where can I find detailed technical documentation and support for IPS511?
Detailed technical documentation, including datasheets, application notes, and support resources for IPS511, can be obtained from the manufacturer's official website or authorized distributors.
IPS511 is a discrete semiconductor device commonly used in power management applications, such as voltage regulation and current control in electronic circuits.
2. What are the key electrical specifications of IPS511?
The key electrical specifications of IPS511 include its maximum voltage rating, current handling capability, on-state voltage drop, and thermal resistance.
3. How does IPS511 compare to other similar semiconductor devices in terms of performance and efficiency?
IPS511 offers competitive performance and efficiency compared to other similar devices, with its unique combination of voltage/current ratings and low on-state resistance.
4. What are the typical operating conditions for IPS511?
IPS511 is typically operated within a specified range of voltage, current, and temperature, ensuring optimal performance and reliability in various applications.
5. What are the recommended mounting and thermal management practices for IPS511?
Proper mounting techniques, such as using appropriate heatsinks and thermal interface materials, are crucial for maintaining the temperature of IPS511 within safe limits during operation.
6. Can IPS511 be used in parallel or series configurations for higher power applications?
Yes, IPS511 can be configured in parallel or series to increase current handling capability or voltage rating, respectively, in high-power applications.
7. What are the common failure modes of IPS511 and how can they be mitigated?
Common failure modes of IPS511 include overcurrent, overvoltage, and thermal overstress. These can be mitigated by implementing proper protection circuits and thermal management strategies.
8. Are there any specific layout considerations when designing a circuit using IPS511?
Careful attention should be given to the layout of the circuit to minimize parasitic effects, optimize current paths, and ensure proper heat dissipation for IPS511.
9. What are the industry standards and certifications relevant to IPS511?
IPS511 may comply with industry standards such as JEDEC, RoHS, and specific application-related certifications, depending on the intended use and market requirements.
10. Where can I find detailed technical documentation and support for IPS511?
Detailed technical documentation, including datasheets, application notes, and support resources for IPS511, can be obtained from the manufacturer's official website or authorized distributors.
IPS511 Связанные ключевые слова
:
IPS511 Цена
IPS511 Картина
IPS511 Напряжение на выводе
Акции: Быстрая проверка котировок
Минимальный заказ: 1
Contains
"IPS5"
series
products